Package Includes:
- (1) Pair of MB Quart FKB116 6.5″ 240 Watt 2-Way Car Audio Speakers
- (1) Pair of MB Quart FKB146 4×6″ 180 Watt Car Audio Coaxial Speakers
Authorized MB Quart Dealer!
Description of FKB116 V2:
The ideal balance of a highend car audio system requires the perfect mix of speaker tone, deep bass impactand clean undistorted power. With MB Quart we make it simple to develop theimpeccable Formula for a great sounding system. The Formula line offers a highend sound quality though a full line of aluminum dome tweeters withpolypropylene cone speakers. These components can be matched with 400 watt peakpower, dual 4 ohm subwoofers to command the deep bass frequencies all powered bythe Q-Stasis circuitry amplifiers in the Formula line up.
Features:
- Pair MB Quart FKB116 6.5″ 240 Watt 2-Way Car Speakers
- RMS Power Handling: 60 Watts (Per Speaker) / 120 Watts (Per Pair)
- Peak Power Handling: 120 Watts (Per Speaker) / 240 Watts (Per Pair)
- Speaker Impedance: 4 Ohms
- Frequency Response: 40 Hz – 22 kHz
- Sensitivity: 88 dB
- Crossover Point: 4 kHz
- Crossover Slope: 12 dB
- Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability
- Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact
- Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
- Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat
- Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
- Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response
- Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
- Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface
- Tinsel Leads: Highly conductive while remaining flexible during high power applications
- Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider
- Internal Crossover: 6 dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
- Frame: Heavy gauge progressive-die stamped steel frames for ultimate rigidity
- Motor: Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application
- Connectors: Use spade connectors or solder direct for the best connection
- Tweeters: 1 inch tweeters produce clear highs while handling plenty of power without sound harsh
- Mounting Diameter/Cut Out: 5.59″ inches
- Outside Diameter: 7.01″
- Mounting Depth/Chassis Depth: 2.13″ inches
Description of FKB146:
The ideal balance of a highend car audio system requires the perfect mix of speaker tone, deep bass impactand clean undistorted power. With MB Quart we make it simple to develop theimpeccable Formula for a great sounding system. The Formula line offers a highend sound quality though a full line of aluminum dome tweeters withpolypropylene cone speakers. These components can be matched with 400 watt peakpower, dual 4 ohm subwoofers to command the deep bass frequencies all powered bythe Q-Stasis circuitry amplifiers in the Formula line up.
Features:
- Pair MB Quart FKB146 4×6″ 180 Watt Coaxial Car Speakers
- RMS Power Handling: 45 Watts (Per Speaker) / 90 Watts (Per Pair)
- Peak Power Handling: 90 Watts (Per Speaker) / 180 Watts (Per Pair)
- Speaker Impedance: 4 Ohms
- Frequency Response: 55 Hz – 20 kHz
- Sensitivity: 88 dB
- Crossover Point: 6 kHz
- Crossover Slope: 12 dB
- Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability
- Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact
- Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
- Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat
- Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
- Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response
- Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
- Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface
- Tinsel Leads: Highly conductive while remaining flexible during high power applications
- Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider
- Internal Crossover: 6 dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
- Frame: Heavy gauge progressive-die stamped steel frames for ultimate rigidity
- Motor: Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application
- Connectors: Use spade connectors or solder direct for the best connection
- Tweeters: 1 inch tweeters produce clear highs while handling plenty of power without sound harsh
- Mounting Diameter/Cut Out: 5.5″ x 3.46″ inches
- Outside Diameter: 5.94″ x 3.84″ inches
- Mounting Depth/Chassis Depth: 3.0″ inches
