Authorized MB Quart Dealer!
Description:
The ideal balance of a highend car audio system requires the perfect mix of speaker tone, deep bass impactand clean undistorted power. With MB Quart we make it simple to develop theimpeccable Formula for a great sounding system. The Formula line offers a highend sound quality though a full line of aluminum dome tweeters withpolypropylene cone speakers. These components can be matched with 400 watt peakpower, dual 4 ohm subwoofers to command the deep bass frequencies all powered bythe Q-Stasis circuitry amplifiers in the Formula line up.
Features:
- Pair MB Quart FKB169 6×9″ 300 Watt Coaxial CarSpeakers
- RMS Power Handling: 75 Watts (Per Speaker) / 150Watts (Per Pair)
- Peak Power Handling: 150 Watts (Per Speaker) / 300Watts (Per Pair)
- Speaker Impedance: 4 Ohms
- Frequency Response: 46 Hz – 20 kHz
- Sensitivity: 88 dB
- Crossover Point: 1 kHz +3K
- Crossover Slope: 12 dB
- Tweeter Dome Material: Aluminum dome tweeters delivergreat sound with increased reliability
- Speaker Surround: Butyl rubber surrounds providedurability and deeper mid-bass impact
- Voice Coil: Pure Copper voice coil creates a strongmagnetic field with a very thin extrusion
- Voice Coil Former: Kapton voice coil former islightweight and efficiently dissipates heat
- Spider: Natural fiber allows flexibility while theinfused epoxy gives strength during the manufacturing process
- Cone Material: Lightweight thermal-formedpolypropylene cones enable faster midrange response
- Surround/Cone Coupling: The cone/surround connectionutilizes a high temp adhesive which assure the cone and surround do notseparate in high power uses or extremes of weather
- Gasket: A textured ABS gasket assures a rigid linearseal to the mounting surface
- Tinsel Leads: Highly conductive while remainingflexible during high power applications
- Cooling System: Over-coil cooling system allows airexchange over the voice coil through the spider
- Internal Crossover: 6 dB internal crossoverintegrated into the design to assure smooth midrange to tweeter frequencytransitions
- Frame: Heavy gauge progressive-die stamped steelframes for ultimate rigidity
- Motor: Ferrite magnet motor creates a strong magneticfield while remaining small enough to fit nearly every application
- Connectors: Use spade connectors or solder direct forthe best connection
- Tweeters: 1 inch tweeters produce clear highs whilehandling plenty of power without sound harsh
- Mounting Diameter/Cut Out: 8.64″ x 5.98″ inches
- Outside Diameter: 10.35″ x 7.20″ inches
- Mounting Depth/Chassis Depth: 3.35″ inches
